What Turbo?

andy

My friend is putting engine from integra(not type r) in crx  brand new from japan.He want turbo.What do u say what turbo should he put in?

.How much does he want to spend ... i think he will have to do some customization not sure if they have a specific complete kit for that set up ... if your asking about turbo size ? how about t3 t4 =D

.How much does he want to spend, where does he want power (low end, mid, top), what are his HP goals, how much dost does he want to run????

.T3/T4 will be his best bet to start off with.

. from : localhost/www.beesandgoats.com/boostfaq/g2icturbo.html

.oh he said that it's too expensive and comlplicate.Now he want maybe 50 hp for start,what should he put in engine,what performance parts?

.50 hp would be any turbo really.....set really really low.......

any kit you get is $2500-$5000.... you need to spend some coin for a kit.

now you can DIY a turbo for about 800-$1200 depending on your area and how thrifty you are.

.what is diy?

.And he don't want turbo anymore he want to get 50 hp without turbo.Can he get 50 hp without turbo?

.ok, tell him to make up his mind...no on to the question....yes you can do 50hp w/o turbo, but its going to cost alot more.  new pistons, rods, cams, engie managment.  Or you could run a 50 shot of nitrous, cheaper than a turbo, but costs to refil.

PS DIY= do it yourself

.one word

NITROUS

.how much is refil?What he must do to put nitrous,it's not so simple I think?

.it is simple for a basic dry kit, a couple wires, a nitrous line, and a hole in the intake tube.  DONe

I dont know about refils, but I would also like to know as i might be using a little nitrous after i get my ITBs going

.
Originally Posted by Honda Freakwhat is diy?
oh dear lord  
Do.........It...........Yourself

.$35 here in Tacoma WA to refill a 10lb bottle.

And around 800 for a 75 shot purchased amp; installed quot;professionallyquot;.