Help PLZ Center Console Removal (Auto QG)

andy

I have removed the center console before on some QR but there all stick. And im having a hard time trying to remove a center console for an automatic sentra. I cant take it out cause of the stick. Help Needed. Thanx

Ohh i already used the search option only found a manual tranny.

.you just open the top bin and pull it back toward yourself use a little force  .

.I'm working from memory of replacing the bulb in my shifter:

On the back of the shifter (the side facing the dash) are two or three screws.  Philips-head, I believe.  When you remove them, you'll be able to remove the shift-lock button (be careful! it's spring-loaded!) and the shifter will slide up and off.

.Ok. i was able to find it. Now my only concern is that there should be a wiring for the o/d button. How do i remove it without tearing the wiring.

.if i recall correctly the od button wires can be disconnected without cutting

.Yep thats the problem im having right now. If anybody can help me out i would really appreciate it.

Thanx!

.it should be right where the button is
the button pops out of the shifter

.I don't remember having to do anything with the O/D button.  The button on the part you remove first isn't really the button.

.anyone ever replaced the little bulb inside the hvac area.  I took out the console, but couldnt actually pull the hvac controls out due to the size.  Is there a way to access that stupid bulb?  Its the one on the left for temp/blower that went bad.