Its not here!!!!!!!

andy

yes i did many searches and so forth.... even looked through all the DIY's but i still havent found a complete parts list for a homemade turbo setup....

this is the biggest list that i could find

1. Downpipe
2. Turbo Manifold
3. Turbo
4. Silicone hoses/Clamps
5. Intercooler
6. Various Pipes
7. Oil line for turbo and various fittings for check valves, oil return etc...
8. Blow off valve
9. Wastegate

please either add to this or come up with a complete list...that would be great....ive been searcing for like an hour and a half. Thanks

.Taken from  from : localhost/www.beesandgoats.com/boostfaq/g2icturbo.html

Turbo Manifold

Wastegate

Turbocharger

Downpipe

Exhaust System

Air Filter

Intercooler Pipe

Intercooler

Blow Off Valve

Vacuum Hose and 'T' Fittings

Oil Supply and Return Hoses
Boost Controller

Fuel and Engine Management

.
Originally Posted by joe7987Taken from  from : localhost/www.beesandgoats.com/boostfaq/g2icturbo.html

Turbo Manifold

Wastegate

Turbocharger

Downpipe

Exhaust System

Air Filter

Intercooler Pipe

Intercooler

Blow Off Valve

Vacuum Hose and 'T' Fittings

Oil Supply and Return Hoses
Boost Controller

Fuel and Engine Management

umm thats wrong you know

.
Originally Posted by Ace$nyperumm thats wrong you know

Then fix it.

.here's another site, check this one out  from : localhost/www.cse.uconn.edu/~yelevich/turbo/turbo.html

.
Originally Posted by joe7987here's another site, check this one out  from : localhost/www.cse.uconn.edu/~yelevich/turbo/turbo.html

thats where i got my orgional list from, i know that cant be a complete list.....

.This is what I'm doing so hope this helps a little.
SpoolinPerformance- Turbo Manifold, Downpipe, Dumptube, and IC pipes.
Turbo
Wastegate
BOV
Oil Lines with fittings
JRC FMIC
Fuel Pump
Wideband
Uberdata

I am also changing my timing belt/ water pump installing new head gasket with ARP head studs.

This is my route and again hope this helps.

.
Originally Posted by JDM92BubbleThis is what I'm doing so hope this helps a little.
SpoolinPerformance- Turbo Manifold, Downpipe, Dumptube, and IC pipes.
Turbo
Wastegate
BOV
Oil Lines with fittings
JRC FMIC
Fuel Pump
Wideband
Uberdata

I am also changing my timing belt/ water pump installing new head gasket with ARP head studs.

This is my route and again hope this helps.

thanks a lot for your response as to everone else....im going with uberdata too just gotta learn how to tune (well basicly everything)

.
Originally Posted by JDM92BubbleWideband
Uberdata
     u wont regret that choice.  i'm running uber + a plx m300, prob. the best decision i've made doing my single cam turbo project.

.
Originally Posted by joe7987here's another site, check this one out  from : localhost/www.cse.uconn.edu/~yelevich/turbo/turbo.html

look its mr.link again giving out websites without knowing if they are correct or not
Ph0x y0o Joey

spell check that

.better link to look at is  from : localhost/honda-tech.com/zerothread?id=1024174amp;postid=0
thats like my forced induction bible, almost everything u need to know is covered within.